Force a full reboot of the Miura device if it is frozen.
This is only to be done if the device is frozen. The below instructions must be carefully followed to avoid any damage. If you are unsure of how to do this, please contact Savoy Systems.
- Use the Revive feature which is activated using a pin-hole reset switch, this is situated next to the power button as shown below (3).
- If using the Revive button, make sure you unplug the pinpad from the till first, then press the pin-hole reset and choose the ‘Power up as Normal’ option when presented with the various start up options. Once it’s powered back up you can plug it back in to the till.
You
may need to hold the pin in for a few seconds to make sure it resets
properly and you need to make sure it is definitely depressing the button
as this can be a bit fiddly!